What should be paid attention to when installing and adapting standard cylinders?- Ningbo Hengmin Lingtong Pneumatics Components & Set Co., Ltd.

Standard Pneumatic Cylinders should pay attention to the following matters when installing and adapting:

1. When the load changes during work, the cylinder with sufficient output force should be selected;

2. Under high temperature or corrosive conditions, the corresponding high temperature or corrosive cylinder should be selected;

3. When the humidity is high, the dust is high, or there are water droplets and welding slag, the cylinder should take protective measures;

4. Before the cylinder is connected to the pipeline, the dirt in the pipeline must be removed to prevent the sundries from entering the cylinder;

5. The medium used in the cylinder should be filtered by a filter element above 40um before it can be used;

6. In the low temperature environment, anti-freezing measures should be taken to prevent the moisture in the system from freezing;

7. Before the cylinder is used, it should be tested with no load. Before running, the buffer should be adjusted to the minimum, and the air should be gradually released to avoid damage to the cylinder;

8. The cylinder should avoid side load as much as possible during the working process to maintain the normal operation of the cylinder and prolong its service life;

9. It is not suitable for the cylinder to be removed for a long time. Attention should be paid to the surface rust prevention, and the intake and exhaust ports should be prevented from blocking the cap.